Pipe and Tube Supply, Inc.


SHAPE 11: STRAIGHT LUG

1. WIDTH DIMENSION      : (inches or millimeters)
2. HEIGHT DIMENSION     : (inches or millimeters)
3. HOLE DIAMETER        : (inches or millimeters)
4. KERF DIMENSION       : (width of cutting tool path)
5. SCRAP DIMENSION      : (distance between parts, in/mm)
6. LEADIN DIMENSION     : (inches or millimeters)
7. VERIFY- YES/NO       : (yes or no)

NOTES:

  • Dashed holes are optional. Corner radius values may be set to 0 for sharp corners.
  • If a HOLE DIAMETER of 0 is defined, no center hole is cut.
  • The leadin distance for the center hole is automatically set to 1/2 of the HOLE DIAMETER value.
    sales (501)372-6556 * FAX (501)372-7694 * (800)770-8823 * ptsemail@comcast.net