Pipe and Tube Supply, Inc.


SHAPE 13: SLANT LUG

1. WIDTH DIMENSION      : (inches or millimeters)
2. HEIGHT DIMENSION     : (inches or millimeters)
3. BOLT HOLE CENTER     : (inches or millimeters)
4. HOLE DIAMETER        : (inches or millimeters)
5. SHOULDER HEIGHT      : (inches or millimeters)
6. RADIUS DIMENSION     : (inches or millimeters) 
7. KERF DIMENSION       : (width of cutting tool path)
8. SCRAP DIMENSION      : (distance between parts, in/mm)
9. LEADIN DIMENSION     : (inches or millimeters)
10. VERIFY- YES/NO      : (yes or no)

NOTES:

  • Dashed holes are optional. Corner radius values may be set to 0 for sharp corners.
  • If a HOLE DIAMETER of 0 is defined, no center hole is cut.
    sales (501)372-6556 * FAX (501)372-7694 * (800)770-8823 * ptsemail@comcast.net