Pipe and Tube Supply, Inc.


SHAPE 43: LAP JOINT

1. WIDTH DIMENSION      : (inches or millimeters)
2. HEIGHT DIMENSION     : (inches or millimeters)
3. NUMBER OF COLUMNS    : (count, 0 to 99)
4. COLUMN DISTANCE      : (inches or millimeters)
5. BOLT HOLE DISTANCE   : (inches or millimeters)
6. BOLT HOLE DIAMETER   : (inches or millimeters)
7. KERF DIMENSION       : (width of cutting tool path)
8. SCRAP DIMENSION      : (distance between parts, in/mm)
9. LEADIN DIMENSION     : (inches or millimeters)
10. VERIFY- YES/NO      : (yes or no)


NOTES:

  • Allows selection of any number of holes.
  • The hole pattern defined is automatically centered on the part from top to bottom and left to right.
  • To create a part with a single row of holes, use shape number 44, SLOTTED PLATE, with a SLOT HEIGHT equal to the SLOT WIDTH.
    sales (501)372-6556 * FAX (501)372-7694 * (800)770-8823 * ptsemail@comcast.net