Pipe and Tube Supply, Inc.


SHAPE 45: LAMP BASE

1. WIDTH DIMENSION      : (inches or millimeters)
2. HEIGHT DIMENSION     : (inches or millimeters)
3. BOLT HOLE DIAMETER   : (inches or millimeters)
4. X BOLT HOLE CENTER   : (inches or millimeters)
5. Y BOLT HOLE CENTER   : (inches or millimeters)
6. CENTER HOLE DIAMETER : (inches or millimeters)
7. CORNER RADIUS        : (inches or millimeters)
8. KERF DIMENSION       : (width of cutting tool path)
9. SCRAP DIMENSION      : (distance between parts, in/mm)
10. LEADIN DIMENSION    : (inches or millimeters)
11. VERIFY- YES/NO      : (yes or no)

NOTES:

  • Dashed holes are optional. Corner radius values may be set to 0 for sharp corners.
  • The hole pattern is automatically centered on the part from top to bottom and left to right.
  • If a CENTER HOLE DIAMETER of 0 is defined, no hole is cut.
  • If a CORNER RADIUS of 0 is defined, sharp corners are cut.
    sales (501)372-6556 * FAX (501)372-7694 * (800)770-8823 * ptsemail@comcast.net