Pipe and Tube Supply, Inc.


SHAPE 46: CAM

1. WIDTH DIMENSION      : (inches or millimeters)
2. LEFT RADIUS          : (inches or millimeters)
3. RIGHT RADIUS         : (inches or millimeters)
4. LEFT HOLE DIAMETER   : (inches or millimeters)
5. RIGHT HOLE DIAMETER  : (inches or millimeters)
6. CENTER DISTANCE      : (inches or millimeters)
7. LEFT OFFSET          : (inches or millimeters)
8. KERF DIMENSION       : (width of cutting tool path)
9. SCRAP DIMENSION      : (distance between parts, in/mm)
10. LEADIN DIMENSION    : (inches or millimeters)
11. VERIFY- YES/NO      : (yes or no)

NOTES:

  • Dashed holes are optional. Corner radius values may be set to 0 for sharp corners.
  • If a LEFT HOLE DIAMETER of 0 is defined, no holes are cut in the part.
  • If a RIGHT HOLE DIAMETER of 0 is defined, only the LEFT HOLE is cut.
    sales (501)372-6556 * FAX (501)372-7694 * (800)770-8823 * ptsemail@comcast.net