Pipe and Tube Supply, Inc.


SHAPE 50: DAMPER

1. HANDLE CENTER DIST.  : (inches or millimeters)
2. OUTER DIAMETER       : (inches or millimeters)
3. INNER DIAMETER       : (inches or millimeters)
4. THICKNESS DIMENSION  : (inches or millimeters)
5. RADIUS DIMENSION     : (inches or millimeters)
6. KERF DIMENSION       : (width of cutting tool path)
7. SCRAP DIMENSION      : (distance between parts, in/mm)
8. LEADIN DIMENSION     : (inches or millimeters)
9. LEADIN POINT 1 (P1)  : (yes or no)
10. LEADOUT             : (yes or no)
11. VERIFY- YES/NO      : (yes or no)

NOTES:

  • Dashed holes are optional. Corner radius values may be set to 0 for sharp corners.
  • If an INNER DIAMETER of 0 is defined, no hole is cut.
  • If "NO" is selected for both LEADIN POINT 1, the default LEADIN POINT 0 position is used.
    sales (501)372-6556 * FAX (501)372-7694 * (800)770-8823 * ptsemail@comcast.net